Solartron Analytical designs and manufactures instrumentation for the rapid and accurate measurement of electrochemical phenomena. Covering DC and AC
electrochemical analysis, our range includes a variety of potentiostats/galvanostats,
impedance analyzers, multiplexers, multistats and application specific software (ZPlot and CorrWare). These tools are important in numerous applications including coatings analysis, gas sensor development and biomedical research.
Solartron potentiostats feature two digital voltmeters with high accuracy and linearity throughout the instrumental range for simultaneous voltage and
current measurement. They also offer 2, 3 and 4 terminal measurement, driven shield technology for minimizing cable impedance effects and floating measurements for grounded structures, such as pipelines and autoclaves. A diverse range of techniques can be used including: cyclic voltammetry, electrochemical noise, step/pulse, galvanodynamic, potentiodynamic and open circuit.
The 1287A Electrochemical Interface has high measurement resolutions down to 1µV for the reference electrodes and 1pA for the working electrode. Coupled with a
Solartron frequency response analyzer, such as the 1260A or
1255B, electrochemical impedance spectroscopy (EIS) measurements can be performed over a full 10µHz to 1MHz frequency range.
Next generation, high performance DC analysis technology offers data capture rates for
cyclic voltammetry and advanced pulse profiles at up to 10,000 samples per second (10kHz).
Our Solartron CellTest® System technology for users who need independent multi-channels allows up to 32 channels of DC experiments to be performed from one PC. New
MultiStat CorrWare software enables real-time data capture and data analysis routines for numerous experimental techniques, from
galvanostatic measurements through to electrochemical noise.
Potentiostats
 |
1287A Potentiostat
The Solartron 1287A Potentiostat is a research grade, high accuracy, wide bandwidth potentiostat/galvanostat that offers a full range of DC capabilities. When coupled with a frequency response analyzer (FRA), the 1287A Potentiostat offers the scientist AC impedance capabilities unrivalled in the marketplace. |
 |
1285A Potentiostat/Galvanostat
The Solartron 1285A potentiostat is a high accuracy potentiostat/galvanostat that offers a full range of DC capabilities including cyclic voltammetry, electrochemical noise and galvanostatic experiments. |
 |
1280Z Electrochemical System
The Solartron 1280Z Electrochemical Test System offers a cost-effective, wide bandwidth
potentiostat/galvanostat and frequency response analyzer (FRA) in a single compact unit. |
Multichannel Potentiostats/Multistats
 |
Solartron CellTest® System
The 1470E multi-channel potentiostat has been specifically designed to meet the requirements of electrochemists and material scientists to enable the rapid generation of high quality, accurate and repeatable data. The 1470E is ideal for research, development and quality assurance of new sensors, corrosion/coatings, battery materials and fuel cells. Coupled with a Solartron 145x series frequency response analyzer (FRA), the 1470E becomes the most powerful multi-channel potentiostat with impedance capability on the market today. |
Frequency Response Analyzers/Impedance Analyzers
 |
1260A Impedance/Gain-Phase Analyzer
The 1260A Impedance/Gain-phase Analyzer is without doubt the most powerful, accurate and flexible frequency response analyzer (FRA) available today. Two or four electrode impedance measurements can be performed in stand-alone mode making the 1260a the ideal choice for general materials characterization. |
 |
1252A Frequency Response Analyzer
Using the single sine correlation technique (SSC), the 1252A
Frequency Response Analyzer provides precise measurement of gain and phase between any two points in a system. This fully digital technique is used to assess performance of both simple and complex systems - mechanical, electronic and electrochemical. |
 |
1255A Frequency Response Analyzer
The 1255A Frequency Response Analyzer is ideally suited to a wide variety of applications in the fields of electronics and the analysis of electrochemical/biological phenomena. |
 |
1255B Frequency Response Analyzer
The 1255B Frequency Response Analyzer is one of a range of instruments that will meet your needs today and in the future. This frequency response analyzer is capable of operating in stand-alone mode, suitable for testing amplifiers, filters and switch mode power supplies (SMPS). |
 |
1253A Frequency Response Analyzer
The 1253A frequency response analyzer (FRA) is an instrument that is capable of meeting today's measurement requirements for dynamic system analysis. Using the single sine correlation technique (SSC), it provides precise data relating to the gain and phase between any points in a dynamic system. |
 |
1250 Frequency Response Analyzer
The 1250 series of frequency response analyzers (FRAs) provide a range of accurate solutions for the measurement of gain, phase and AC impedance (when coupled with a suitable AC impedance interface). |
Power Boosters
 |
New
Power Boosters
Solartron's range of NEW power boosters in combination with single
and multi-channel potentiostats enable high performance electrochemical
tests to be run on a wide range of energy storage devices and electrochemical cells. These
techniques include Potentiostat/galvanostat DC tests, cyclic voltammetry, ohmic drop and voltage/current pulse
and change/discharge cycling. In addition, a frequency response analyzer (FRA) can be added to the system to provide complete
impedance (AC) characterization of the cell. |
Multiplexers
 |
1281 Multiplexer
The model 1281 Multiplexer is a computer-controlled multiplexer with eight channels for use with a Solartron potentiostat/galvanostat e.g. 1280/1285A/1286 or 1287A. It can sequence a potentiostat to any of eight different test cells for high performance multichannel testing and automated monitoring. |
Software
 |
ZPlot & CorrWare Software
CorrWare and ZPlot software packages provide the most comprehensive range of control, measurement and analysis facilities for electrochemical research. ZPlot and CorrWare are available separately or as a fully integrated package, enabling you to combine impedance measurements with conventional DC electrochemical techniques. |
Electrodes/Thermo Russell
 |
pH electrodes and electrochemical sensors
Thermo Russell offers a comprehensive range of pH electrodes and electrochemical sensors. Their full range of products includes meters, electrodes and ancillaries for the measurement of pH, ORP, conductivity, dissolved oxygen and specific ions. New water test strips and kits complement the range of products for the potable water and environmental testing markets. |
